1 / 1
25 LB R407C R-407C Refrigerant Cylinder
The established R-22 retrofit blend for air conditioning and medium-temperature work.
- Net weight 25 lb / 11.3 kg
- Safety class A1 · GWP 1774 · ODP 0
- Composition R-32 / R-125 / R-134a
- Factory-sealed, new and unused
- Free FedEx Ground · ships in 24 hours
EPA Section 608 certification verified before dispatch.
R-407C — 25 lb factory-sealed cylinder
The established R-22 retrofit blend for air conditioning and medium-temperature work. Supplied new and unused in a non-refillable steel service cylinder with the manufacturer valve seal intact, packed to 49 CFR hazardous-materials standards and dispatched from our Fort Worth facility within 24 hours of certification clearing.
Technical specification
| Refrigerant designation | R-407C |
|---|---|
| Chemical family | HFC zeotropic blend |
| Composition | R-32 / R-125 / R-134a |
| Nominal blend ratio | 23 / 25 / 52 % by weight |
| ASHRAE 34 safety class | A1 — lower toxicity, no flame propagation |
| Global warming potential | 1774 (AR4, 100-year) |
| Ozone depletion potential | 0 |
| Temperature glide | ≈ 13 °F — high glide |
| Boiling point at 1 atm | −47.2 °F / −44.0 °C |
| Compatible lubricant | POE (polyol ester) |
| Net weight | 25 lb / 11.3 kg |
| Cylinder type | Non-refillable steel service cylinder |
| Cylinder dimensions | 17.2 in high × 10.2 in diameter |
| SKU | RM-407C-25 |
Compatible applications
- R-22 retrofits — Approved conversions where the manufacturer publishes a procedure.
- Air conditioning — Comfort cooling equipment originally designed for R-407C.
- Medium-temp refrigeration — Coolers and process systems in the medium-temperature band.
Before you order
R-407C has roughly 13 °F of temperature glide. Take superheat and subcooling from a pressure-temperature chart that lists dew and bubble points separately, or your readings will be wrong.
Retrofitting from R-22 requires an oil change to POE. Mineral oil will not circulate reliably with this blend.
Safe handling
- Verify the equipment nameplate specifies R-407C and note the approved charge before connecting.
- This system requires POE (polyol ester). Mixing incompatible lubricants causes compressor failure.
- Charge in the liquid phase only — vapour charging shifts the composition of a blend.
- Use gauges, hoses and recovery equipment rated for this refrigerant’s operating pressures.
- Store upright and secured, in a cool, dry, ventilated area away from heat, sparks and open flame.
- Recover refrigerant — knowingly venting is a violation of Clean Air Act Section 608.
Shipping
Free FedEx Ground on every cylinder within the contiguous United States, typically 2–5 business days after pickup. Ground service only — compressed refrigerant does not travel by air. We cannot deliver to PO boxes, APO/FPO addresses, Alaska, Hawaii or US territories. A signature is required.
Professional service use only. High-glide zeotropic blend. Charge liquid only and use dew/bubble point P-T data. EPA Section 608 certification is verified before this order is dispatched.
Other refrigerants.
30 LB R134A R-134a Refrigerant Cylinder
Single-component HFC for automotive A/C, medium-temperature refrigeration and chillers. Net weight 30 lb / 13.6 kg Safety class A1 · GWP 1430…
25 LB R448A R-448A Refrigerant Cylinder
Lower-GWP replacement for R-404A in supermarket racks and commercial refrigeration. Net weight 25 lb / 11.3 kg Safety class A1 · GWP…
24 LB R404A R-404A Refrigerant Cylinder
Low-temperature commercial refrigeration standard for walk-ins, freezers and cold storage. Net weight 24 lb / 10.9 kg Safety class A1 · GWP…
30 LB R22 R-22 Refrigerant Cylinder
AHRI 700 reclaimed HCFC-22 for keeping legacy equipment in service legally. Net weight 30 lb / 13.6 kg Safety class A1 ·…