25lb R-448A Refrigerant, Honeywell, R404A & R22 Replacement – Made in USA
1 / 3
R-448A Refrigerant — 25 LB Cylinder
Lower-GWP replacement for R-404A in supermarket racks and commercial refrigeration.
You save $70.00 on this cylinder
R-448A 25LB Refrigerant Cylinder
Lower-GWP replacement for R-404A in supermarket racks and commercial refrigeration.
Supplied factory sealed with the manufacturer valve seal intact, packed to 49 CFR hazardous-materials standards and processed at our Fort Worth facility within 1 business day after order review.


R-448A quick specifications
R-448A is supplied for equipment the manufacturer specifically identifies as taking it. Always confirm the system nameplate and the manufacturer documentation before use.
It is not a universal drop-in replacement, and it must never be mixed with another refrigerant in the same circuit.
| Composition | R-32 / R-125 / R-1234yf / R-134a / R-1234ze |
|---|---|
| Safety class | A1, no flame propagation |
| Global warming potential | 1387 (AR4) |
| Ozone-depletion potential | 0 |
| Compatible lubricant | POE (polyol ester) |
| Net weight | 25 lb / 11.3 kg |
Sealed and clearly identified
One service cylinder holding 25 lb / 11.3 kg net of new, unused R-448A, with a sealed valve and clear handling information.
- One factory-sealed cylinderManufacturer valve seal intact on arrival.
- Non-refillable service cylinderBuilt for equipment service, not for refilling.
- Clear product and hazard labellingProduct, net weight and handling data legible on the label.
- Safety data sheet enclosedCurrent SDS packed with every shipment.


Where R-448A is commonly used
Use R-448A only where the equipment manufacturer identifies it as the required refrigerant, and only at the approved charge.
Walk-in coolers & freezers
Low and medium temperature boxes.
Display cases
Reach-in and open-front merchandising refrigeration.
Cold storage
Distribution warehouses and process cooling.
Use the correct service equipment
Service calls for tools rated to this refrigerant's operating pressures and correct recovery practice.
Follow the cylinder label, the current safety data sheet, the equipment manufacturer's instructions and every applicable federal, state and local requirement.
- Verify the nameplate before chargingConfirm the refrigerant and the approved charge weight.
- Match the lubricantThis system takes POE (polyol ester).
- Use correctly rated service equipmentGauges, hoses and recovery gear rated for these pressures.
- Recover — never knowingly ventVenting refrigerant violates Clean Air Act Section 608.

R-448A product FAQs
Product condition, compatibility, shipping, cylinder weight, storage and delivery.
Yes. Every virgin cylinder ships new and unused with the manufacturer valve seal intact. Nothing is decanted, blended or repackaged in our facility.
Reclaimed product — currently R-22 — is clearly marked as reclaimed and processed to AHRI 700 purity by a certified reclaimer. The batch analysis travels with the cylinder.
Read the equipment nameplate. The manufacturer prints the required refrigerant and the factory charge there, and that is the only answer that counts.
Refrigerants are not interchangeable. Never treat one as a drop-in for another unless the equipment manufacturer publishes an approved retrofit procedure for that exact model, and never mix two refrigerants in one circuit.
Orders are processed within 1 business day after order review. Orders placed on weekends or US public holidays begin processing on the next business day.
Ground transit is typically 2–4 business days within the contiguous United States, so most orders arrive within 3–5 business days. Multi-cylinder orders may split across shipments and arrive separately.
The listing weight is the net refrigerant charge inside the cylinder. The carrier label shows gross or dimensional weight, which includes the steel cylinder, the valve, the hazmat carton and the packing.
A 25 lb net cylinder commonly bills near 40 lb gross. If the net weight stamped on the cylinder itself does not match your order, keep it sealed and contact us with photos.
Store it upright and secured against falling, in a cool, dry, ventilated space away from direct sun, open flame, sparks and heat. Keep the valve cap fitted whenever it is not connected.
A2L products such as R-32 and R-454B are mildly flammable and need A2L-rated gauges, recovery equipment and leak detection. Follow the safety data sheet shipped with your order.
Do not connect it, do not attempt a repair, and do not move it into an enclosed space. Clear people from the area and remove ignition sources. Ventilate if it is safe to do so.
Call 911 first if there is any immediate hazard. Once the area is safe, send us your order number with photos of the carton, cylinder body, valve and label and we will replace or refund it.
Check the carrier delivery photo, then look at side doors, loading docks, garages, front desks and neighbouring units. Hazmat is often left at a receiving area rather than a front door.
Still missing after 48 hours? Send us the order and tracking numbers and we will open a carrier trace.
Still need help?
Contact RefrigiMart customer care with your order or product details.
Customer Reviews
Based on 13 verified reviews
R-448A. Product is excellent, competitive pricing and delivery was very fast. Thanks
Refrigerant review. Awesome delivery time and great service
In time without any problems.
PURCHASE. ALI IS VERY HELPFUL AND PROVIDED GREAT PRICING FOR OUR COMPANY AS WE ARE A DISTRUBITOR. WE WILL BE ORDERING AGAIN SEVERAL TIMES
R-448A 25 LBS Honeywell Refrigerants - MADE IN USA
Great customer service. Shipping company lost my order I contacted support had my order the next day delivered when the shipping company said it was delivered the day before thank you for your help
Excellent service. Their service is great! Fast shipping and reliable service.
R-448A 25 LBS Refrigerants Honeywell - MADE IN USA
Excellent Service. We ordered your product and and received it promptly. All is good. Thanks.
Excellent. Very profession and exactly what I’ve been looking for
R448A 25 LB Refrigerants Chemours/Honeywell Replacement for R404A and R22 - MADE IN USA
fast shipping, good deals. good prices
Other refrigerants
R-134a Refrigerant — 30 LB Cylinder
Single-component HFC for automotive A/C, medium-temperature refrigeration and chillers. Net weight 30 lb / 13.6 kg Safety class A1 · GWP 1430…
R-404A Refrigerant — 24 LB Cylinder
Low-temperature commercial refrigeration standard for walk-ins, freezers and cold storage. Net weight 24 lb / 10.9 kg Safety class A1 · GWP…
R-407C Refrigerant — 25 LB Cylinder
The established R-22 retrofit blend for air conditioning and medium-temperature work. Net weight 25 lb / 11.3 kg Safety class A1 ·…
R-22 Refrigerant — 30 LB Cylinder
AHRI 700 reclaimed HCFC-22 for keeping legacy equipment in service legally. Net weight 30 lb / 13.6 kg Safety class A1 ·…
Leave a product review
Tell other technicians and buyers how this cylinder arrived and performed.